Retail Fixture & Shelving Removal in Arlington, TX
Retail fixtures are built to be reconfigured, not removed, and taking a gondola run out without damaging the floor or the walls is a dismantling job with an order to it.
Call (972) 093-0938- Gondola runs dismantled section by section
- Slatwall and wall standards removed
- Display cases handled as glass
- Floor and shell protected
Fixtures come apart in a specific order
A gondola run is a base, uprights, shelves and end caps, tied together and often anchored. Shelves come off first, then the end caps, then the uprights, then the base — and doing it in that order is what keeps the floor undamaged and the crew safe, because a stripped upright run is unstable.
Slatwall and wall standards are screwed or anchored into the wall, so removal leaves fixings and holes. That is expected and it is a making-good question for the following trade rather than something a hauling crew resolves.
Display cases are the item that needs the most care. They are glass in a metal frame, they are heavier than they look, and a case broken during removal is a hazard in a space someone else has to walk through.
Fixtures we remove
- Gondola shelving and bases
- Slatwall panels and inserts
- Wall standards and brackets
- Glass display cases
- Cash wraps and service counters
- Clothing rails and racks
- Mannequins and forms
- Fitting room partitions and doors
- Mirrors and wall panels
- Internal signage and light boxes
- Stockroom racking
- Point of sale fixtures
Anchoring, and why it matters
Tall gondola runs and stockroom racking are usually anchored — to the floor, to the wall, or to each other along the top rail. That anchoring is what makes them safe to load while they are standing, and removing it in the wrong order is what makes them unsafe to be near.
So the sequence runs the other way: shelves off first to reduce the weight up high, then the end caps and top rails, then the uprights, and the anchors last with the frame already supported. It looks slower than pulling a run apart and it is considerably safer, particularly in a unit where other trades are working.
Anchors leave holes in the slab and the wall. That is expected, and making good is a following trade rather than something a removal crew resolves.
Count the runs, not the square footage
Linear feet of gondola and the number of display cases price this job better than the unit's floor area does.
FAQ
Retail Fixture & Shelving Removal in Arlington, TX — common questions
- Do you dismantle the fixtures?
- Yes — that is most of the work. Gondola runs come apart in order, slatwall is unscrewed rather than pried, and display cases are handled as the glass they are.
- Will removing slatwall damage the wall?
- It leaves fixings and holes, unavoidably. Making good is a contractor's job that follows the clearance, and most leases require it — worth planning for rather than discovering at handback.
- Can fixtures be resold rather than scrapped?
- Sometimes. Gondola in good condition has a secondary market. Say so in advance and it is dismantled carefully rather than quickly — the two are not the same job.
- How is this priced?
- By linear feet of run and the number of cases and counters, not by floor area. Two units the same size can differ by a factor of three depending on how densely they were fitted.
Ready when you are
You point. We haul. That is the whole arrangement.
Choose a window from the live Arlington calendar, or send a few photographs and get the number first. Homes or businesses, one item or a whole property.
Or call (972) 093-0938
The Arlington branch
Junk Koala Arlington
1140 W Pioneer Pkwy, Ste 1144E
Arlington, TX 76013